Chemical-Synthesis-Based Approach to Glycoprotein Functions in the Endoplasmic Reticulum

The introduction of Asn-linked glycans to nascent polypeptides occurs in the lumen of the endoplasmic reticulum of eukaryotic cells. After the removal of specific sugar residues, glycoproteins acquire signals in the glycoprotein quality control (GPQC) system and enter the folding cycle composed of lectin-chaperones calnexin (CNX) and calreticulin (CRT), glucosidase II (G-II), and UDP-Glc:glycoprotein glucosyltransferase (UGGT). G-II initiates glycoproteins’ entry and exit from the cycle, and UGGT serves as the “folding sensor”. This account summarizes our effort to analyze the properties of enzymes and lectins that play important roles in GPQC, especially those involved in the CNX/CRT cycle. To commence our study, general methods for the synthesis of high-mannose-type glycans and glycoproteins were established. Based on these, various substrates to analyze components of the GPQC were created, and properties of CRT, G-II, and UGGT have been clarified.     

Mass spectrometry imaging of latent fingerprints using titanium oxide development powder as an existing matrix

Recent research has focused on increasing the evidentiary value of latent fingerprints through chemical analysis. Although researchers have optimized the use of organic and metal matrices for matrix‐assisted laser desorption/ionization‐mass spectrometry imaging (MALDI‐MSI) of latent fingerprints, the use of development powders as matrices has not been fully investigated. Carbon forensic powder (CFP), a common nonporous development technique, was shown to be an efficient one‐step matrix; however, a high‐resolution mass spectrometer was required in the low mass range due to carbon clusters. Titanium oxide (TiO₂) is another commonly used development powder, especially for dark nonporous surfaces. Here, forensic TiO₂ powder is utilized as a single‐step development and matrix technique for chemical imaging of latent fingerprints without the requirement of a high‐resolution mass spectrometer. All studied compounds were successfully detected when TiO₂ was used as the matrix in positive mode, although, generally, the overall ion signals were lower than the previously studied CFP. TiO₂ provided quality mass spectrometry (MS) images of endogenous and exogenous latent fingerprint compounds. The subsequent addition of traditional matrices on top of the TiO₂ powder was ineffective for universal detection of latent fingerprint compounds. Forensic TiO₂ development powder works as an efficient single‐step development and matrix technique for MALDI‐MSI analysis of latent fingerprints in positive mode and does not require a high‐resolution mass spectrometer for analysis.     

New regio/chemoselective synthesis of hydrogenated imidazo[1,5-b]pyridazines

The cascade heterocyclization of 1,2-diamino-4-phenyl-imidazole with ethyl 2-arylidene-2-cyanoacetates affords 1,2,3,4-tetrahydroimidazo[1,5-b]pyridazine-3-carbonitrile derivatives as mixtures of diastereomers. The experimental data and quantum chemical calculations were used to propose processes. The three-component processing with above-mentioned diamine, ethyl cyanoacetate and aromatic aldehydes leads to the same products in generally lower yields.     

Permanent antimicrobial silicone rubber based on bonding guanidine polymers

Recently, silicone rubber (VMQ) was extensively used in household articles and medical devices. To develop a kind of safe and long‐term antimicrobial VMQ was of great significance. In this work, a kind of vinyl‐contained polyhexamethylene guanidine hydrochloride (VPHMG) was synthesized and used as antimicrobial additive for VMQ. With the increasing of VPHMG addition, the mechanical properties and antimicrobial properties of VMQ‐VPHMG were significantly improved. In particular, the antimicrobial rates against Escherichia coli and Staphylococcus aureus were higher than 99.99% as for 4 wt% of VPHMG addition. Moreover, the surface concentration of VPHMG as well as the antimicrobial rates revealed almost unchanged after being extracted by water and methanol. All the results indicated the vinyl‐contained VPHMG vulcanization and therefore provided the permanent antimicrobial performance for VMQ.     

Ionic Pd/NHC Catalytic System Enables Recoverable Homogeneous Catalysis: Mechanistic Study and Application in the Mizoroki–Heck Reaction

N-Heterocyclic carbene (NHC) ligands are ubiquitously utilized in catalysis. A common catalyst design model assumes strong M–NHC binding in this metal–ligand framework. In contrast to this common assumption, we demonstrate here that lability and controlled cleavage of the M−NHC bond (rather than its stabilization) could be more important for high-performance catalysis at low catalyst concentrations. The present study reveals a dynamic stabilization mechanism with labile metal–NHC binding and [PdX₃]⁻[NHC-R]⁺ ion pair formation. Access to reactive anionic palladium intermediates formed by dissociation of the NHC ligands and plausible stabilization of the molecular catalyst in solution by interaction with the [NHC-R]⁺ azolium ion is of particular importance for an efficient and recyclable catalyst. These ionic Pd/NHC complexes allowed for the first time the recycling of the complex in a well-defined form with isolation at each cycle. Computational investigation of the reaction mechanism confirms a facile formation of NHC-free anionic Pd in polar media through either Ph–NHC coupling or reversible H–NHC coupling. The present study formulates novel ideas for M/NHC catalyst design.     

Mechanical and electrical response variation of the polyurethane–tin oxide–carbon nanotube composite microfiber depending on the chemical solution

Toward the goal of smart sensor systems for wearable electronics, polymer microfiber‐based free‐standing sensors benefit from excellent flexibility, decent ductility, and easy wearability in comparison with thin‐film‐based sensing devices. Herein, we report a hydrophobic and conducting single‐strand microfiber‐based liquid‐phase chemical sensor consisting of polyurethane (PU), tin oxide (SnO₂), and carbon nanotube (CNT) composites with applying a (1H,1H,2H,2H‐heptadecafluorodec‐1‐yl) phosphonic acid (HDF‐PA)‐based self‐assembled monolayer. The free‐standing HDF‐PA‐treated PU–SnO₂–CNT composite microfiber showing selective filtering properties with the repellency of water and the penetration of an organic solvent is electrically and mechanically characterized. Finally, the single‐strand HDF‐PA‐treated PU–SnO₂–CNT composite microfiber‐based chemical sensor, which shows excellent mechanical properties and aqueous stability, is demonstrated to detect the presence of a chemical in pure water or counterfeit gasoline in pure gasoline by observing mechanical changes, especially variations in the length and diameter of the fiber, and monitoring the electrical resistance change. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 495–502     

柚皮素/β-环糊精超分子体系的包合行为

本文采用超声法制备了柚皮素（NAR）与β-环糊精（βCD）的包合物.粉末-X射线衍射（XRD）和红外吸收光谱（IR）测定均表明形成的包合物具有不同于主客体的新的结构性质.¹H NMR与ROESY核磁共振（NMR）实验表明NAR以苯环端从βCD的宽口端进入，并形成稳定的超分子包合物.量子化学计算分析NAR/βCD包合物的形成过程表明，驱动力源于焓驱动与氢键弱相互作用力；能隙和结合能分析得到的最优包合模式与NMR研究结果一致；ONIOM分层计算验证了上述结果.分子对接模拟出的最优包合模式也与量子化学计算、NMR的分析结果吻合.本文获取了清晰的NAR/βCD包合物构型及其形成机理，为该超分子药物的定量构效关系研究提供了理论参考.     

Screening of Three Transition Metal‐Mediated Reactions Compatible with DNA‐Encoded Chemical Libraries

The construction of DNA‐encoded chemical libraries (DECLs) crucially relies on the availability of chemical reactions, which are DNA‐compatible and which exhibit high conversion rates for a large number of diverse substrates. In this work, we present our optimization and validation procedures for three copper and palladium‐catalyzed reactions (Suzuki cross‐coupling, Sonogashira cross‐coupling, and copper(I)‐catalyzed alkyne‐azide cycloaddition (CuAAC)), which have been successfully used by our group for the construction of large encoded libraries.     

The thermophysical properties of low‐temperature Pb plasma

The thermophysical properties of low‐temperature Pb plasma are calculated at temperatures 10–100 kK and densities below 0.2 of the solid‐state value. The thermodynamic values (pressure and internal energy) and transport coefficients (electrical conductivity, thermal conductivity, and thermal power) are considered. The plasma composition and thermodynamic parameters are obtained within the chemical approach, namely by means of the solution of the corresponding system of the coupled mass action law equations. Atom ionization up to +4 is taken into consideration. The electronic transport coefficients are calculated within the relaxation time approximation. The results obtained by means of the present model are compared with the available data of other models and experiments.